• Login
• .
• Help
• .
• Contact us
• .
• £ $ €

Shopping Basket

Empty

 

How to measure for ready made Pencil Pleat Curtains

Quick Measuring Tips!

• We offer an alteration service to the drop measurements of all our curtains.
• Measure to the nearest whole cm
• Measure in several places to allow for any irregularities and use the smallest of those measurements
• Always use a metal or wooden tape for better accuracy
• Always measure the pole or track, not the window
• Get someone else to help by holding one end of the tape
• Always use something safe to stand on rather than stretch

All our ready made curtain are sold in pairs, so a 90 inch wide pair of curtains would fit a 90 inch pole or track as each pack would contain two curtains each of approximately 90 inches before gathering, below is our guide:

Pole or Track width up to 48" (122cm)
Recommended curtain width 117cm (46")

Pole or Track width 48" to 66" (122 - 168cm)
Recommended curtain width 66" (168cm)

Pole or Track width 66" to 90" (168 - 228cm)
Recommended curtain width 90" (228cm)

The above recommendations are based on two times gather but anything between 1.5 and 2.5 is acceptable according to the amount of fullness you would like.

The measuring process is very straightforward, however if at any time you need assistance then please click here.

	Measuring for a pole Width Measure the distance between A and B, which is the pole only and excludes the finials (the decorative ends on your pole). Drop Measure the smallest distance between C (which is bottom of the curtain ring) and D which could be any one of the following: To a window sill, in which case measure to the sill then deduct 1 cm* so that the curtain will sit that amount off the sill. Below the sill, in which case measure to the sill and then add 15 cm*. If there is a radiator within 15 cm below the sill then measure to the radiator and deduct 1 cm*. To the floor, in which case measure to the floor then deduct 1 cm* so that the curtains will sit above the floor. Trailing on the floor to create an unconventional and contemporary look, simply add as much fabric as you wish to trail on the floor. * These allowances are only a guide, you can choose any allowance which best suits your preference.
	Measuring for a track Width Measure the distance between A and B, which is the entire length of your track. If your track has an overlap in the middle then add the length of the overlap to the overall distance. Drop Measure the smallest distance between C (which is the top of the track) and D which could be any one of the following: To a window sill, in which case measure to the sill then deduct 1 cm* so that the curtain will sit that amount off the sill. Below the sill, in which case measure to the sill and then add 15 cm*. If there is a radiator within 15 cm below the sill then measure to the radiator and deduct 1 cm*. To the floor, in which case measure to the floor then deduct 1 cm* so that the curtains will sit above the floor. Trailing on the floor to create an unconventional and contemporary look, simply add as much fabric as you wish to trail on the floor. * These allowances are only a guide, you can choose any allowance which best suits your preference.
Pencil Pleat Curtains
	Click here for a printable version